ABLIC U.S.A. Inc.
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
S-817A24ANB-CUNT2U
Zobrazit detail DataSheets

S-817A24ANB-CUNT2U

Product Overview

Category

The S-817A24ANB-CUNT2U belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit

Package

The S-817A24ANB-CUNT2U comes in a compact surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

The S-817A24ANB-CUNT2U is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.4V
  • Output Current: 50mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 1.0µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-817A24ANB-CUNT2U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • High Precision Voltage Regulation: The S-817A24ANB-CUNT2U ensures accurate and stable output voltage, making it suitable for sensitive electronic components.
  • Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: The device consumes minimal current when in standby mode, resulting in improved energy efficiency.
  • Thermal Shutdown Protection: The regulator incorporates a thermal shutdown feature that protects it from overheating, ensuring reliable operation.
  • Short-Circuit Current Limit: In the event of a short circuit, the S-817A24ANB-CUNT2U limits the current to prevent damage to the device and connected components.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures accurate output.
  • Low dropout voltage allows for efficient power conversion.
  • Low quiescent current results in improved energy efficiency.
  • Thermal shutdown protection prevents overheating.
  • Short-circuit current limit protects the device and connected components.

Disadvantages

  • Limited output current capacity (50mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

The S-817A24ANB-CUNT2U operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through a combination of active and passive components within the regulator.

Detailed Application Field Plans

The S-817A24ANB-CUNT2U finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

  1. S-817A25ANB-CUNT2U: Similar to the S-817A24ANB-CUNT2U, but with an output voltage of 2.5V.
  2. S-817A23ANB-CUNT2U: Similar to the S-817A24ANB-CUNT2U, but with an output voltage of 2.3V.
  3. S-817A26ANB-CUNT2U: Similar to the S-817A24ANB-CUNT2U, but with an output voltage of 2.6V.

These alternative models provide flexibility in choosing the desired output voltage for specific applications.

Word count: 446

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-817A24ANB-CUNT2U v technických řešeních

Sure! Here are 10 common questions and answers related to the application of S-817A24ANB-CUNT2U in technical solutions:

1. What is the S-817A24ANB-CUNT2U? - The S-817A24ANB-CUNT2U is a voltage detector IC (integrated circuit) manufactured by a specific company. It is commonly used in various technical solutions.

2. What is the purpose of the S-817A24ANB-CUNT2U? - The purpose of this IC is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

3. What is the operating voltage range of the S-817A24ANB-CUNT2U? - The operating voltage range of this IC is typically between 1.6V and 6.0V.

4. How does the S-817A24ANB-CUNT2U detect voltage levels? - This IC uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers an output signal.

5. What is the output signal of the S-817A24ANB-CUNT2U? - The output signal is typically an active-low signal, meaning it goes low (logic 0) when the voltage falls below the threshold.

6. Can the threshold voltage be adjusted in the S-817A24ANB-CUNT2U? - No, the threshold voltage is fixed and cannot be adjusted in this particular IC model.

7. What is the typical accuracy of the voltage detection in the S-817A24ANB-CUNT2U? - The typical accuracy of this IC is around ±1.5%.

8. What is the maximum current consumption of the S-817A24ANB-CUNT2U? - The maximum current consumption is typically around 1.0µA.

9. Can the S-817A24ANB-CUNT2U be used in battery-powered applications? - Yes, this IC is commonly used in battery-powered applications due to its low current consumption and wide operating voltage range.

10. Are there any additional features or protections in the S-817A24ANB-CUNT2U? - Yes, this IC includes features like hysteresis (to prevent oscillation near the threshold) and a built-in delay circuit (to avoid false triggering during voltage fluctuations).

Please note that the specific details and answers may vary depending on the manufacturer's datasheet and application requirements.