Viz Specifikace pro podrobnosti o produktu.
S-817A16APF-CUFTFG
Product Overview
Category
S-817A16APF-CUFTFG belongs to the category of voltage regulators.
Use
This product is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage regulation: S-817A16APF-CUFTFG ensures a stable output voltage, regardless of input fluctuations.
- Low power consumption: The device operates with minimal power consumption, making it energy-efficient.
- Compact package: It comes in a small form factor, suitable for space-constrained applications.
- High accuracy: The voltage regulator provides precise voltage control, ensuring reliable performance.
Package
S-817A16APF-CUFTFG is available in a compact surface-mount package, allowing for easy integration into circuit boards.
Essence
The essence of this product lies in its ability to maintain a constant output voltage, providing stability and reliability to electronic systems.
Packaging/Quantity
The product is typically packaged in reels or tubes, containing a specific quantity of units per package. Please refer to the manufacturer's specifications for detailed packaging information.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 1.6V
- Output current: Up to 50mA
- Dropout voltage: 100mV (typical)
- Operating temperature range: -40°C to +85°C
- Quiescent current: 10µA (typical)
Detailed Pin Configuration
The S-817A16APF-CUFTFG voltage regulator has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Overcurrent protection: The device incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
- Thermal shutdown: In case of excessive temperature, the voltage regulator automatically shuts down to prevent damage.
- Short-circuit protection: S-817A16APF-CUFTFG is equipped with short-circuit protection, ensuring the safety of the circuit during fault conditions.
Advantages and Disadvantages
Advantages
- High accuracy and stability in voltage regulation
- Low power consumption
- Compact size for space-constrained applications
- Overcurrent, thermal, and short-circuit protection features enhance circuit reliability
Disadvantages
- Limited output current capacity (up to 50mA)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
S-817A16APF-CUFTFG operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any variations in the input voltage.
Detailed Application Field Plans
This voltage regulator finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
- S-817A15APF-CUFTFG: Similar to S-817A16APF-CUFTFG, but with an output voltage of 1.5V.
- S-817A17APF-CUFTFG: Similar to S-817A16APF-CUFTFG, but with an output voltage of 1.7V.
- S-817A18APF-CUFTFG: Similar to S-817A16APF-CUFTFG, but with an output voltage of 1.8V.
These alternative models provide flexibility in choosing the desired output voltage for specific applications.
Note: The above information is based on the product specifications available at the time of writing. Please refer to the manufacturer's datasheet for the most up-to-date and accurate information.
Word count: 533 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-817A16APF-CUFTFG v technických řešeních
Sure! Here are 10 common questions and answers related to the application of S-817A16APF-CUFTFG in technical solutions:
1. What is the S-817A16APF-CUFTFG? - The S-817A16APF-CUFTFG is a voltage detector IC (integrated circuit) manufactured by a specific company.
2. What is the purpose of the S-817A16APF-CUFTFG? - The purpose of this IC is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
3. What are the typical applications of the S-817A16APF-CUFTFG? - This IC is commonly used in various electronic devices, such as battery-powered systems, portable devices, and automotive applications, where monitoring the voltage level is critical.
4. How does the S-817A16APF-CUFTFG work? - The IC continuously monitors the input voltage and compares it with a reference voltage internally set. When the input voltage drops below the reference voltage, it triggers an output signal.
5. What is the voltage range that the S-817A16APF-CUFTFG can detect? - The S-817A16APF-CUFTFG can detect voltages ranging from 1.6V to 6.0V.
6. What is the output type of the S-817A16APF-CUFTFG? - The output of this IC is an open-drain N-channel transistor, which requires an external pull-up resistor to provide a logic-level output.
7. Can the S-817A16APF-CUFTFG be used in both low and high voltage applications? - No, this IC is specifically designed for low voltage applications and cannot be used in high voltage environments.
8. What is the operating temperature range of the S-817A16APF-CUFTFG? - The S-817A16APF-CUFTFG has an operating temperature range of -40°C to +85°C.
9. Does the S-817A16APF-CUFTFG have any built-in hysteresis? - Yes, this IC has a built-in hysteresis of typically 0.1V, which helps prevent output oscillation near the threshold voltage.
10. Can the S-817A16APF-CUFTFG be used in battery protection circuits? - Yes, due to its low power consumption and ability to monitor voltage levels, this IC is commonly used in battery protection circuits to prevent over-discharge or under-voltage conditions.
Please note that the answers provided here are general and may vary depending on the specific application and requirements.