Viz Specifikace pro podrobnosti o produktu.
S-812C49BPI-C5DTFU
Product Overview
Category
The S-812C49BPI-C5DTFU belongs to the category of voltage regulators.
Use
This product is primarily used for voltage regulation in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short circuit protection
Package
The S-812C49BPI-C5DTFU comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to regulate voltage with high precision and efficiency, ensuring stable power supply to electronic devices.
Packaging/Quantity
The S-812C49BPI-C5DTFU is typically packaged in reels and is available in quantities of 1000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Output Current: 150mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-812C49BPI-C5DTFU has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- High precision voltage regulation ensures stable output voltage.
- Low dropout voltage allows efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption when the device is idle.
- Thermal shutdown protection prevents damage due to excessive temperature.
- Short circuit protection safeguards the device and connected components from damage in case of a short circuit.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance of electronic circuits.
- Low dropout voltage enables efficient operation in low voltage conditions.
- Thermal shutdown and short circuit protection enhance the durability and safety of the device.
Disadvantages
- Limited output current may restrict its use in high-power applications.
- The small surface-mount package may require specialized equipment for soldering and handling.
Working Principles
The S-812C49BPI-C5DTFU operates based on a voltage regulation principle known as a linear regulator. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of variations in the input voltage or load conditions.
Detailed Application Field Plans
The S-812C49BPI-C5DTFU finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical devices
Detailed and Complete Alternative Models
- S-812C33BPI-C5DT2G: Similar specifications with a lower output voltage range.
- S-812C50BPI-C5DTFG: Similar specifications with a higher output current capability.
- S-812C25BPI-C5DTFG: Similar specifications with a lower dropout voltage.
These alternative models offer flexibility in choosing the most suitable voltage regulator based on specific requirements and constraints.
Word count: 455 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-812C49BPI-C5DTFU v technických řešeních
Sure! Here are 10 common questions and answers related to the application of S-812C49BPI-C5DTFU in technical solutions:
Q: What is the S-812C49BPI-C5DTFU? A: The S-812C49BPI-C5DTFU is a voltage regulator IC (integrated circuit) that provides stable power supply for various electronic devices.
Q: What is the input voltage range of S-812C49BPI-C5DTFU? A: The input voltage range of S-812C49BPI-C5DTFU is typically between 2.3V and 6.0V.
Q: What is the output voltage of S-812C49BPI-C5DTFU? A: The output voltage of S-812C49BPI-C5DTFU can be set to various values, such as 3.3V or 5.0V, depending on the specific model.
Q: What is the maximum output current of S-812C49BPI-C5DTFU? A: The maximum output current of S-812C49BPI-C5DTFU is typically around 150mA.
Q: Can S-812C49BPI-C5DTFU handle input voltage fluctuations? A: Yes, S-812C49BPI-C5DTFU has built-in protection features to handle input voltage fluctuations and provide a stable output voltage.
Q: Is S-812C49BPI-C5DTFU suitable for battery-powered applications? A: Yes, S-812C49BPI-C5DTFU is designed to be efficient and suitable for battery-powered applications due to its low quiescent current.
Q: Does S-812C49BPI-C5DTFU have overcurrent protection? A: Yes, S-812C49BPI-C5DTFU has built-in overcurrent protection to prevent damage to the IC and connected devices.
Q: Can S-812C49BPI-C5DTFU operate in a wide temperature range? A: Yes, S-812C49BPI-C5DTFU is designed to operate in a wide temperature range, typically from -40°C to +85°C.
Q: What are the typical applications of S-812C49BPI-C5DTFU? A: S-812C49BPI-C5DTFU can be used in various applications, including consumer electronics, industrial equipment, and automotive systems.
Q: Is S-812C49BPI-C5DTFU available in different package options? A: Yes, S-812C49BPI-C5DTFU is available in different package options, such as SOT-89 and SNT-6A, to suit different design requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for S-812C49BPI-C5DTFU.