S-1711C2818-M6T1G

Basic Information Overview

• Category: Electronic Component
• Use: Voltage Regulator
• Characteristics: High Efficiency, Low Dropout Voltage
• Package: SOT-23
• Essence: Linear Regulator
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Input Voltage Range: 2.5V to 6.5V
• Output Voltage Range: 1.2V to 5.5V
• Maximum Output Current: 150mA
• Dropout Voltage: 200mV at 100mA
• Line Regulation: ±0.3%
• Load Regulation: ±0.5%
• Quiescent Current: 75µA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1711C2818-M6T1G has three pins: 1. VIN (Pin 1): Input voltage pin 2. VOUT (Pin 2): Output voltage pin 3. GND (Pin 3): Ground pin

Functional Features

• Low dropout voltage enables efficient regulation even with small input-output voltage differentials.
• Excellent line and load regulation ensures stable output voltage under varying conditions.
• Low quiescent current minimizes power consumption in standby mode.
• Overcurrent protection safeguards the regulator and connected circuitry.

Advantages and Disadvantages

Advantages: - High efficiency due to low dropout voltage. - Compact SOT-23 package allows for space-saving designs. - Wide input voltage range provides flexibility in various applications. - Good line and load regulation ensure stable output voltage.

Disadvantages: - Limited maximum output current of 150mA may not be suitable for high-power applications. - Dropout voltage of 200mV at 100mA may affect performance in low voltage scenarios.

Working Principles

The S-1711C2818-M6T1G is a linear regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly. This ensures that the output voltage remains constant despite changes in input voltage or load conditions.

Detailed Application Field Plans

The S-1711C2818-M6T1G is commonly used in various electronic devices and systems, including: 1. Battery-powered devices: Provides stable voltage for microcontrollers, sensors, and other low-power components. 2. Portable audio players: Regulates the voltage for audio amplifiers and digital-to-analog converters. 3. IoT devices: Ensures reliable power supply for wireless modules, sensors, and microcontrollers. 4. Automotive electronics: Used in infotainment systems, lighting controls, and other vehicle applications. 5. Industrial control systems: Provides regulated voltage for PLCs, motor drivers, and sensor interfaces.

Detailed and Complete Alternative Models

1. S-1711C1818-M6T1G: Similar specifications but with a lower maximum output current of 100mA.
2. S-1711C3818-M6T1G: Higher maximum output current of 300mA but with a slightly higher dropout voltage.
3. S-1711C2818-M6T2G: Same specifications as S-1711C2818-M6T1G but available in a different package (SOT-323).

(Note: The above alternative models are provided for reference and may have slight variations in specifications.)

In conclusion, the S-1711C2818-M6T1G is a voltage regulator with high efficiency, low dropout voltage, and excellent line and load regulation. It is widely used in various electronic devices and offers a compact package for space-constrained designs. While it has limitations in terms of maximum output current and dropout voltage, it provides reliable voltage regulation for a range of applications.