S-1711B2515-M6T1G

Basic Information Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High Efficiency, Low Dropout Voltage
Package: SOT-23-5
Essence: Linear Regulator
Packaging/Quantity: Tape & Reel / 3000 pieces per reel

Specifications

• Input Voltage Range: 2.5V to 16V
• Output Voltage Range: 1.2V to 5.5V
• Maximum Output Current: 150mA
• Dropout Voltage: 200mV at 100mA
• Line Regulation: ±0.2% typical
• Load Regulation: ±0.4% typical
• Quiescent Current: 50µA typical
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1711B2515-M6T1G has a total of five pins:

1. VIN (Pin 1): Input voltage pin
2. GND (Pin 2): Ground pin
3. EN (Pin 3): Enable pin for turning the regulator on/off
4. FB (Pin 4): Feedback pin for setting the output voltage
5. VOUT (Pin 5): Output voltage pin

Functional Features

• High efficiency with low dropout voltage
• Wide input voltage range allows for versatile applications
• Excellent line and load regulation for stable output voltage
• Low quiescent current for power-saving operation
• Short-circuit protection and thermal shutdown for enhanced safety

Advantages and Disadvantages

Advantages: - High efficiency ensures minimal power loss - Low dropout voltage enables operation with low input voltages - Wide input voltage range provides flexibility in various applications - Excellent line and load regulation ensures stable output voltage

Disadvantages: - Limited maximum output current of 150mA - SOT-23-5 package may require additional space on the PCB

Working Principles

The S-1711B2515-M6T1G is a linear regulator that operates by maintaining a constant voltage difference between the input and output. It uses a pass transistor to regulate the output voltage based on the feedback received from the FB pin. When the enable (EN) pin is high, the regulator is turned on, and it adjusts the pass transistor to maintain the desired output voltage. The dropout voltage is the minimum voltage required for the regulator to operate correctly.

Detailed Application Field Plans

The S-1711B2515-M6T1G finds applications in various electronic devices and systems, including:

1. Battery-powered devices: Provides stable voltage regulation for portable electronics such as smartphones, tablets, and wearables.
2. IoT devices: Ensures reliable power supply for sensors, microcontrollers, and communication modules in Internet of Things applications.
3. Automotive electronics: Used in automotive systems like infotainment systems, lighting controls, and engine management units.
4. Industrial equipment: Enables precise voltage regulation in industrial automation, control systems, and instrumentation.
5. Consumer electronics: Suitable for use in audio/video equipment, gaming consoles, and home appliances.

Detailed and Complete Alternative Models

1. S-1711B2515-M6T1U: Same specifications and features, but available in a different packaging option (SOT-23-5, non-reel).
2. S-1711B2515-M6T2G: Similar specifications and features, but with a higher maximum output current of 200mA.
3. S-1711B2515-M6T3G: Similar specifications and features, but with a lower dropout voltage of 100mV at 100mA.

(Note: The above alternative models are for illustrative purposes and may not represent the actual available alternatives in the market.)

This comprehensive entry provides detailed information about the S-1711B2515-M6T1G voltage regulator, including its basic overview, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.