S-1335A17-A4T2U3

Basic Information Overview

Category: Integrated Circuit (IC)
Use: Voltage Regulator
Characteristics: Low dropout, high accuracy, low quiescent current
Package: SOT-23-5
Essence: Regulates voltage to ensure stable power supply
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

Input Voltage Range: 2.5V to 6.0V
Output Voltage Range: 1.2V to 5.5V
Dropout Voltage: 200mV (typical) at 100mA load
Quiescent Current: 30μA (typical)
Output Current: 100mA (maximum)
Line Regulation: ±0.05% (typical)
Load Regulation: ±0.1% (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1335A17-A4T2U3 IC has a total of five pins arranged as follows: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin for turning the regulator on/off 4. VOUT: Output voltage pin 5. NC: No connection pin

Functional Features

Low dropout voltage ensures efficient power conversion even with small input-output voltage differentials.
High accuracy provides precise output voltage regulation.
Low quiescent current minimizes power consumption during standby or idle mode.
Built-in overcurrent protection safeguards the circuit from excessive current flow.

Advantages and Disadvantages

Advantages: - Compact SOT-23-5 package allows for space-saving integration in various applications. - Wide input voltage range enables compatibility with different power sources. - Excellent line and load regulation ensure stable output voltage under varying conditions.

Disadvantages: - Limited output current of 100mA may not be sufficient for high-power applications. - Dropout voltage of 200mV may cause a slight voltage drop across the regulator.

Working Principles

The S-1335A17-A4T2U3 is a linear voltage regulator that utilizes a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage from the output, adjusting the pass transistor's resistance to maintain a constant output voltage. The enable pin allows the user to control the regulator's operation, providing flexibility in power management.

Detailed Application Field Plans

The S-1335A17-A4T2U3 is suitable for a wide range of applications, including but not limited to: 1. Battery-powered devices: Portable electronics, IoT devices, wearables 2. Communication systems: Wireless modules, routers, access points 3. Industrial equipment: Sensors, actuators, control systems 4. Automotive electronics: Infotainment systems, lighting controls, navigation devices

Detailed and Complete Alternative Models

S-1313B18-A4T2U3: Similar voltage regulator with higher output current capability (300mA).
S-1135A33-A4T2U3: Voltage regulator with adjustable output voltage and higher input voltage range (up to 16V).
S-1711A28-A4T2U3: Low dropout voltage regulator with ultra-low quiescent current for power-sensitive applications.

(Note: These alternative models are provided as examples and may have different specifications and pin configurations. Refer to respective datasheets for detailed information.)

This entry provides comprehensive information about the S-1335A17-A4T2U3 voltage regulator IC. Its features, advantages, and disadvantages make it suitable for various applications, while alternative models offer flexibility based on specific requirements.

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-1335A17-A4T2U3 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of S-1335A17-A4T2U3 in technical solutions:

Q: What is S-1335A17-A4T2U3? A: S-1335A17-A4T2U3 is a specific model or part number of a component used in technical solutions, typically in electronic circuits.
Q: What is the purpose of S-1335A17-A4T2U3? A: The purpose of S-1335A17-A4T2U3 is to perform a specific function within a technical solution, such as voltage regulation or power management.
Q: How does S-1335A17-A4T2U3 work? A: S-1335A17-A4T2U3 works by receiving an input signal or voltage and regulating it to provide a stable output signal or voltage according to its specifications.
Q: What are the key features of S-1335A17-A4T2U3? A: Some key features of S-1335A17-A4T2U3 may include low power consumption, high efficiency, small form factor, wide input voltage range, and overcurrent/overvoltage protection.
Q: In which applications can S-1335A17-A4T2U3 be used? A: S-1335A17-A4T2U3 can be used in various applications, including but not limited to consumer electronics, industrial automation, automotive systems, and telecommunications.
Q: What is the recommended operating temperature range for S-1335A17-A4T2U3? A: The recommended operating temperature range for S-1335A17-A4T2U3 is typically specified by the manufacturer and can vary, but it is usually between -40°C to +85°C.
Q: What are the input and output voltage specifications of S-1335A17-A4T2U3? A: The input voltage range and output voltage specifications of S-1335A17-A4T2U3 will depend on the specific model and should be checked in the datasheet provided by the manufacturer.
Q: Can S-1335A17-A4T2U3 handle high current loads? A: The current handling capability of S-1335A17-A4T2U3 will depend on its design and specifications. It is important to check the datasheet for the maximum current rating.
Q: Are there any recommended external components or circuitry required when using S-1335A17-A4T2U3? A: Depending on the application, additional external components such as capacitors or resistors may be required to ensure proper operation and stability. These recommendations can be found in the datasheet.
Q: Where can I find more information about S-1335A17-A4T2U3? A: More detailed information about S-1335A17-A4T2U3 can be found in the product datasheet provided by the manufacturer. Additionally, online resources, forums, or contacting the manufacturer directly can provide further assistance.