ABLIC U.S.A. Inc.
Obrázek může být reprezentace.
Viz Specifikace pro podrobnosti o produktu.
S-1333D31-M5T1U3
Zobrazit detail DataSheets

S-1333D31-M5T1U3

Product Overview

Category

S-1333D31-M5T1U3 belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The S-1333D31-M5T1U3 comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The S-1333D31-M5T1U3 is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 300mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 45μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1333D31-M5T1U3 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: The S-1333D31-M5T1U3 ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent overheating.

Advantages and Disadvantages

Advantages

  • Small size allows for easy integration into compact electronic devices.
  • High efficiency results in minimal power loss during voltage regulation.
  • Wide input voltage range makes it compatible with various power sources.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in the output voltage under certain conditions.

Working Principles

The S-1333D31-M5T1U3 operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

The S-1333D31-M5T1U3 is commonly used in the following applications:

  1. Battery-powered devices: It ensures a constant voltage supply to electronic devices powered by batteries, such as portable audio players and handheld gaming consoles.
  2. IoT devices: The regulator provides stable voltage to IoT devices, enabling reliable operation and communication.
  3. Wearable electronics: It is suitable for powering small wearable devices like fitness trackers and smartwatches.

Detailed and Complete Alternative Models

  1. S-1313Bxx-M5T1U3: Similar voltage regulator with adjustable output voltage.
  2. S-1333Cxx-M5T1U3: Higher output current version of the S-1333D31-M5T1U3.
  3. S-1353Dxx-M5T1U3: Voltage regulator with additional features like power-on reset and watchdog timer.

Note: The above alternative models are from the same product series and offer similar functionality with slight variations.

In conclusion, the S-1333D31-M5T1U3 is a compact and efficient voltage regulator that provides stable voltage output for various electronic applications. Its small size, wide input voltage range, and overcurrent protection make it a reliable choice for battery-powered devices, IoT applications, and wearable electronics.

Word count: 470 words

Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-1333D31-M5T1U3 v technických řešeních

Sure! Here are 10 common questions and answers related to the application of S-1333D31-M5T1U3 in technical solutions:

Q1: What is S-1333D31-M5T1U3? A1: S-1333D31-M5T1U3 is a specific model of voltage detector IC (integrated circuit) used in various technical solutions.

Q2: What is the purpose of S-1333D31-M5T1U3? A2: The purpose of S-1333D31-M5T1U3 is to detect voltage levels and provide an output signal based on the detected voltage.

Q3: What voltage range does S-1333D31-M5T1U3 support? A3: S-1333D31-M5T1U3 supports a voltage range of X volts to Y volts. (Replace X and Y with the actual voltage range specified by the datasheet)

Q4: How can S-1333D31-M5T1U3 be integrated into a technical solution? A4: S-1333D31-M5T1U3 can be integrated by connecting its input pin to the voltage source and configuring the necessary output pins according to the desired application.

Q5: Can S-1333D31-M5T1U3 be used in battery-powered devices? A5: Yes, S-1333D31-M5T1U3 can be used in battery-powered devices as it has low power consumption and operates within a wide voltage range.

Q6: Does S-1333D31-M5T1U3 have any built-in protection features? A6: Yes, S-1333D31-M5T1U3 typically includes built-in overvoltage protection, undervoltage lockout, and thermal shutdown features.

Q7: What is the output format of S-1333D31-M5T1U3? A7: S-1333D31-M5T1U3 provides a digital output signal indicating the voltage level, typically in the form of a logic high or low.

Q8: Can S-1333D31-M5T1U3 be used in automotive applications? A8: Yes, S-1333D31-M5T1U3 is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.

Q9: Are there any specific precautions to consider when using S-1333D31-M5T1U3? A9: It is important to follow the manufacturer's guidelines and datasheet recommendations regarding voltage limits, input/output configurations, and operating conditions.

Q10: Where can I find more information about S-1333D31-M5T1U3? A10: You can find detailed information about S-1333D31-M5T1U3 in the product datasheet provided by the manufacturer.