Viz Specifikace pro podrobnosti o produktu.
S-1315B13-A6T2U3
Product Overview
Category
S-1315B13-A6T2U3 belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low power consumption
- Wide input voltage range
- Adjustable output voltage
- Overcurrent protection
- Thermal shutdown protection
Package
The S-1315B13-A6T2U3 comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
The S-1315B13-A6T2U3 is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 1.0V to 4.5V (adjustable)
- Output Current: Up to 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 35µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1315B13-A6T2U3 has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- Voltage regulation: The S-1315B13-A6T2U3 ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit, protecting both the regulator and the connected circuitry.
- Thermal shutdown protection: In case of excessive temperature, the device shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Small size allows for easy integration into compact electronic devices.
- High efficiency results in minimal power loss.
- Wide input voltage range makes it suitable for various applications.
- Adjustable output voltage provides flexibility.
- Overcurrent and thermal shutdown protection enhance reliability.
Disadvantages
- Limited output current may not be sufficient for high-power applications.
- Dropout voltage may cause a slight voltage drop across the regulator.
Working Principles
The S-1315B13-A6T2U3 operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.
Detailed Application Field Plans
The S-1315B13-A6T2U3 is commonly used in the following applications:
- Battery-powered devices: Provides regulated voltage to ensure consistent performance even as the battery voltage decreases.
- Portable electronics: Enables efficient power management in smartphones, tablets, and other portable devices.
- IoT devices: Suitable for low-power IoT applications where space and power consumption are critical factors.
- Wearable devices: Compact size and low power consumption make it ideal for wearable technology.
Detailed and Complete Alternative Models
- S-1315B13-A6T2U2: Similar to S-1315B13-A6T2U3 but with a fixed output voltage of 3.3V.
- S-1315B13-A6T2U4: Similar to S-1315B13-A6T2U3 but with a higher output current capability of 300mA.
- S-1315B13-A6T2U5: Similar to S-1315B13-A6T2U3 but with a wider input voltage range of 2.7V to 6.5V.
These alternative models offer variations in output voltage, current capacity, and input voltage range to cater to different application requirements.
Word count: 536 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-1315B13-A6T2U3 v technických řešeních
Sure! Here are 10 common questions and answers related to the application of S-1315B13-A6T2U3 in technical solutions:
1. What is S-1315B13-A6T2U3? - S-1315B13-A6T2U3 is a specific model or part number of a component used in technical solutions.
2. What is the purpose of S-1315B13-A6T2U3? - The purpose of S-1315B13-A6T2U3 is to perform a specific function within a technical solution, such as voltage regulation or power management.
3. How does S-1315B13-A6T2U3 work? - S-1315B13-A6T2U3 works by receiving an input voltage and regulating it to provide a stable output voltage within a specified range.
4. What are the key features of S-1315B13-A6T2U3? - Some key features of S-1315B13-A6T2U3 may include low quiescent current, high efficiency, wide input voltage range, and overcurrent protection.
5. What are the typical applications of S-1315B13-A6T2U3? - S-1315B13-A6T2U3 can be used in various applications, such as battery-powered devices, portable electronics, IoT devices, and industrial automation.
6. What is the maximum input voltage supported by S-1315B13-A6T2U3? - The maximum input voltage supported by S-1315B13-A6T2U3 is typically specified in the datasheet, and it may vary depending on the specific model.
7. Can S-1315B13-A6T2U3 handle high current loads? - Yes, S-1315B13-A6T2U3 is designed to handle certain current loads, but the maximum current rating should be checked in the datasheet to ensure it meets the requirements of your application.
8. Is S-1315B13-A6T2U3 compatible with different voltage levels? - S-1315B13-A6T2U3 can typically support a wide range of input and output voltage levels, but it's important to verify the specific voltage requirements of your application.
9. Are there any recommended external components to use with S-1315B13-A6T2U3? - The datasheet of S-1315B13-A6T2U3 usually provides recommendations for external components like capacitors or resistors that may be required for proper operation.
10. Where can I find more information about S-1315B13-A6T2U3? - More detailed information about S-1315B13-A6T2U3 can be found in the product datasheet, which is usually available on the manufacturer's website or by contacting their technical support team.
Please note that the answers provided here are general and may vary depending on the specific model and manufacturer of S-1315B13-A6T2U3. It's always recommended to refer to the datasheet and consult with the manufacturer for accurate and up-to-date information.