Viz Specifikace pro podrobnosti o produktu.
S-1312C33-M5T1U3
Product Overview
Category
The S-1312C33-M5T1U3 belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage: 3.3V
- Maximum Output Current: 150mA
- Dropout Voltage: 160mV (typ.)
- Quiescent Current: 30μA (typ.)
- Operating Temperature Range: -40°C to +85°C
Package
The S-1312C33-M5T1U3 comes in a small and compact SOT-23-5 package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic applications.
Packaging/Quantity
The S-1312C33-M5T1U3 is typically packaged in reels, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage: 3.3V ±2%
- Maximum Output Current: 150mA
- Dropout Voltage: 160mV (typ.)
- Quiescent Current: 30μA (typ.)
- Line Regulation: ±0.05% (typ.)
- Load Regulation: ±0.2% (typ.)
- Ripple Rejection Ratio: 70dB (typ.)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1312C33-M5T1U3 has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
- NC (No Connection)
- EN (Enable)
Functional Features
- Low dropout voltage
- Low quiescent current
- High ripple rejection ratio
- Built-in overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages
- Wide input voltage range
- Stable and regulated output voltage
- Low power consumption
- Compact package size
- Built-in protection features
Disadvantages
- Limited maximum output current (150mA)
- Dropout voltage may affect efficiency in low input voltage scenarios
Working Principles
The S-1312C33-M5T1U3 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
The S-1312C33-M5T1U3 can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics
Detailed and Complete Alternative Models
- S-1312C33-A5T1U3
- S-1312C33-B5T1U3
- S-1312C33-C5T1U3
- S-1312C33-D5T1U3
- S-1312C33-E5T1U3
These alternative models offer similar specifications and functionality as the S-1312C33-M5T1U3, providing flexibility for different design requirements.
Word count: 346 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-1312C33-M5T1U3 v technických řešeních
Sure! Here are 10 common questions and answers related to the application of S-1312C33-M5T1U3 in technical solutions:
Q1: What is S-1312C33-M5T1U3? A1: S-1312C33-M5T1U3 is a specific model of voltage regulator IC (integrated circuit) used for regulating voltage levels in electronic circuits.
Q2: What is the input voltage range for S-1312C33-M5T1U3? A2: The input voltage range for S-1312C33-M5T1U3 is typically between 2.0V and 6.0V.
Q3: What is the output voltage of S-1312C33-M5T1U3? A3: The output voltage of S-1312C33-M5T1U3 is fixed at 3.3V, which makes it suitable for applications requiring a stable voltage level.
Q4: What is the maximum output current of S-1312C33-M5T1U3? A4: The maximum output current of S-1312C33-M5T1U3 is typically around 150mA, which means it can supply up to 150mA of current to the load.
Q5: Is S-1312C33-M5T1U3 suitable for battery-powered applications? A5: Yes, S-1312C33-M5T1U3 is suitable for battery-powered applications as it has low quiescent current and operates efficiently even with limited power supply.
Q6: Does S-1312C33-M5T1U3 have built-in protection features? A6: Yes, S-1312C33-M5T1U3 incorporates various protection features like overcurrent protection, thermal shutdown, and short-circuit protection to ensure safe operation.
Q7: Can S-1312C33-M5T1U3 be used in automotive applications? A7: Yes, S-1312C33-M5T1U3 is designed to meet automotive standards and can be used in automotive applications where a stable 3.3V voltage level is required.
Q8: What is the package type of S-1312C33-M5T1U3? A8: S-1312C33-M5T1U3 comes in a small surface-mount package known as SOT-23-5, which has five pins.
Q9: Is S-1312C33-M5T1U3 suitable for low-power microcontrollers? A9: Yes, S-1312C33-M5T1U3 is suitable for powering low-power microcontrollers, sensors, and other electronic components that require a stable 3.3V supply.
Q10: Can multiple S-1312C33-M5T1U3 ICs be connected in parallel for higher current output? A10: No, it is not recommended to connect multiple S-1312C33-M5T1U3 ICs in parallel for higher current output as it may lead to stability issues and affect the overall performance.