Viz Specifikace pro podrobnosti o produktu.
S-1142D27I-E6T1U
Product Overview
Category
S-1142D27I-E6T1U belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
The S-1142D27I-E6T1U comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
The S-1142D27I-E6T1U is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.5V
- Output Voltage: 2.7V
- Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1142D27I-E6T1U has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: The S-1142D27I-E6T1U ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
- Thermal shutdown protection: In case of excessive heat, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Small size allows for easy integration into compact electronic devices.
- High efficiency results in minimal power loss.
- Wide input voltage range makes it suitable for various applications.
Disadvantages
- Limited output current may not be sufficient for high-power devices.
- Dropout voltage may affect performance in low-voltage applications.
Working Principles
The S-1142D27I-E6T1U operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in the input voltage.
Detailed Application Field Plans
The S-1142D27I-E6T1U finds applications in various electronic devices, including: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices
Detailed and Complete Alternative Models
- S-1132Bxx-I6T1G: Similar voltage regulator with adjustable output voltage.
- S-1112Bxx-N4T1G: Low dropout voltage regulator with higher output current capability.
- S-1172Bxx-I6T1G: Voltage regulator with built-in overvoltage protection.
Note: The above alternative models are just a few examples; there are several other alternatives available in the market.
Word count: 409 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-1142D27I-E6T1U v technických řešeních
Sure! Here are 10 common questions and answers related to the application of S-1142D27I-E6T1U in technical solutions:
Q1: What is S-1142D27I-E6T1U? A1: S-1142D27I-E6T1U is a specific model of voltage detector IC (integrated circuit) used for monitoring and detecting voltage levels in electronic circuits.
Q2: What is the operating voltage range of S-1142D27I-E6T1U? A2: The operating voltage range of S-1142D27I-E6T1U is typically between 0.8V and 6.0V.
Q3: How does S-1142D27I-E6T1U detect voltage levels? A3: S-1142D27I-E6T1U uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold, triggering an output signal when the voltage exceeds or falls below the threshold.
Q4: Can S-1142D27I-E6T1U be used in battery-powered applications? A4: Yes, S-1142D27I-E6T1U can be used in battery-powered applications as it operates within a wide voltage range and has low power consumption.
Q5: What is the output configuration of S-1142D27I-E6T1U? A5: S-1142D27I-E6T1U provides an open-drain output, which requires an external pull-up resistor to achieve a logic high level.
Q6: Is S-1142D27I-E6T1U suitable for overvoltage protection? A6: No, S-1142D27I-E6T1U is primarily designed for voltage monitoring and detection, not for overvoltage protection. It can be used to trigger protective measures when a certain voltage threshold is exceeded.
Q7: Can S-1142D27I-E6T1U be used in automotive applications? A7: Yes, S-1142D27I-E6T1U is suitable for automotive applications as it meets the necessary requirements such as temperature range and reliability.
Q8: What is the typical response time of S-1142D27I-E6T1U? A8: The typical response time of S-1142D27I-E6T1U is around 200 microseconds, allowing for fast detection of voltage changes.
Q9: Does S-1142D27I-E6T1U have any built-in hysteresis? A9: Yes, S-1142D27I-E6T1U has a built-in hysteresis of approximately 100mV, which helps prevent oscillation or false triggering near the threshold voltage.
Q10: Can multiple S-1142D27I-E6T1U ICs be connected together in parallel? A10: Yes, multiple S-1142D27I-E6T1U ICs can be connected together in parallel to monitor different voltage levels simultaneously, provided that each IC is properly powered and isolated.