Viz Specifikace pro podrobnosti o produktu.
S-1135D32-M5T1U
Product Overview
Category
S-1135D32-M5T1U belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
The S-1135D32-M5T1U comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
The S-1135D32-M5T1U is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.0V - 6.0V
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 45μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1135D32-M5T1U has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: The S-1135D32-M5T1U ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
- Thermal shutdown protection: In case of excessive heat, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact designs.
- High efficiency results in minimal power loss.
- Wide input voltage range accommodates various power sources.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Dropout voltage may affect performance in low-input voltage scenarios.
Working Principles
The S-1135D32-M5T1U operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in input voltage and load conditions.
Detailed Application Field Plans
The S-1135D32-M5T1U finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices
Detailed and Complete Alternative Models
- S-1135D33-M5T1U
- S-1135D31-M5T1U
- S-1135D30-M5T1U
- S-1135D34-M5T1U
These alternative models offer different output voltages to cater to specific application requirements.
In conclusion, the S-1135D32-M5T1U is a compact voltage regulator with excellent efficiency and a wide input voltage range. Its overcurrent and thermal shutdown protection features make it a reliable choice for various electronic devices. However, its limited output current and dropout voltage should be considered when selecting it for high-power or low-input voltage applications.
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-1135D32-M5T1U v technických řešeních
Sure! Here are 10 common questions and answers related to the application of S-1135D32-M5T1U in technical solutions:
Q1: What is S-1135D32-M5T1U? A1: S-1135D32-M5T1U is a voltage regulator IC (integrated circuit) that provides stable power supply for various electronic devices.
Q2: What is the input voltage range of S-1135D32-M5T1U? A2: The input voltage range of S-1135D32-M5T1U is typically between 2.0V and 6.0V.
Q3: What is the output voltage of S-1135D32-M5T1U? A3: The output voltage of S-1135D32-M5T1U is fixed at 3.2V.
Q4: What is the maximum output current of S-1135D32-M5T1U? A4: The maximum output current of S-1135D32-M5T1U is typically 150mA.
Q5: Can S-1135D32-M5T1U handle input voltage fluctuations? A5: Yes, S-1135D32-M5T1U has built-in protection features that allow it to handle input voltage fluctuations and provide a stable output voltage.
Q6: Is S-1135D32-M5T1U suitable for battery-powered applications? A6: Yes, S-1135D32-M5T1U is designed to be highly efficient and is suitable for battery-powered applications where stable voltage regulation is required.
Q7: Does S-1135D32-M5T1U have overcurrent protection? A7: Yes, S-1135D32-M5T1U has overcurrent protection that prevents excessive current flow and protects the IC from damage.
Q8: Can S-1135D32-M5T1U operate in a wide temperature range? A8: Yes, S-1135D32-M5T1U is designed to operate in a wide temperature range, typically between -40°C and 85°C.
Q9: What is the package type of S-1135D32-M5T1U? A9: S-1135D32-M5T1U comes in a small SOT-23-5 package, which is compact and suitable for space-constrained applications.
Q10: Are there any application notes or reference designs available for S-1135D32-M5T1U? A10: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of S-1135D32-M5T1U in various technical solutions. These resources can be found on the manufacturer's website or obtained from their technical support team.
Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of S-1135D32-M5T1U.