Viz Specifikace pro podrobnosti o produktu.
S-1132B30-M5T1G
Product Overview
Category
S-1132B30-M5T1G belongs to the category of voltage regulators.
Use
This product is used to regulate voltage in electronic circuits, ensuring a stable and constant output voltage regardless of input fluctuations.
Characteristics
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 0.8V to 5.5V
- Maximum Output Current: 300mA
- Dropout Voltage: 200mV (typical)
- Low Quiescent Current: 20µA (typical)
- Package Type: SOT-23-5
- Essence: Linear voltage regulator
Packaging/Quantity
The S-1132B30-M5T1G is typically packaged in reels containing 3,000 units per reel.
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 0.8V to 5.5V
- Output Current: Up to 300mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 20µA (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Type: SOT-23-5
Detailed Pin Configuration
The S-1132B30-M5T1G has five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: NC (No Connection) Pin 4: VOUT (Output Voltage) Pin 5: EN (Enable)
Functional Features
- Voltage Regulation: The S-1132B30-M5T1G provides a stable and regulated output voltage, ensuring reliable operation of connected electronic devices.
- Low Dropout Voltage: With a dropout voltage as low as 200mV, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
- Low Quiescent Current: The device consumes minimal current when in standby or idle mode, resulting in improved energy efficiency.
- Enable Pin: The EN pin allows for easy control of the regulator's output, enabling or disabling it as needed.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows for flexibility in various applications.
- Low dropout voltage ensures efficient power conversion.
- Small package size (SOT-23-5) enables space-saving designs.
- Low quiescent current minimizes power consumption.
Disadvantages
- Maximum output current limited to 300mA, which may not be sufficient for high-power applications.
- No thermal protection feature included.
Working Principles
The S-1132B30-M5T1G operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This allows it to maintain a constant output voltage despite variations in the input voltage.
Detailed Application Field Plans
The S-1132B30-M5T1G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the S-1132B30-M5T1G include: - S-1132B33-M5T1G - S-1132B25-M5T1G - S-1132B28-M5T1G - S-1132B29-M5T1G
These models have different output voltage ranges and may be suitable for specific application requirements.
Word count: 431 words
Seznam 10 běžných otázek a odpovědí souvisejících s aplikací S-1132B30-M5T1G v technických řešeních
Sure! Here are 10 common questions and answers related to the application of S-1132B30-M5T1G in technical solutions:
Q1: What is S-1132B30-M5T1G? A1: S-1132B30-M5T1G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when the voltage falls below a certain threshold.
Q2: What is the operating voltage range of S-1132B30-M5T1G? A2: The operating voltage range of S-1132B30-M5T1G is from 0.8V to 6.0V.
Q3: How does S-1132B30-M5T1G detect voltage levels? A3: S-1132B30-M5T1G uses a built-in voltage reference and comparator to monitor the input voltage and compare it with a preset threshold.
Q4: What is the output type of S-1132B30-M5T1G? A4: S-1132B30-M5T1G has an open-drain output, which means it can be connected to other devices or circuits for further processing.
Q5: Can S-1132B30-M5T1G be used in battery-powered applications? A5: Yes, S-1132B30-M5T1G is suitable for battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q6: What is the accuracy of the voltage detection in S-1132B30-M5T1G? A6: The voltage detection accuracy of S-1132B30-M5T1G is ±1.5%.
Q7: Can S-1132B30-M5T1G be used in automotive applications? A7: Yes, S-1132B30-M5T1G is AEC-Q100 qualified and can be used in automotive applications.
Q8: Does S-1132B30-M5T1G have any built-in protection features? A8: Yes, S-1132B30-M5T1G has built-in overcurrent protection and thermal shutdown functions to ensure safe operation.
Q9: What is the package type of S-1132B30-M5T1G? A9: S-1132B30-M5T1G is available in a small SOT-23-5 package.
Q10: Can S-1132B30-M5T1G be used in industrial control systems? A10: Yes, S-1132B30-M5T1G is suitable for various industrial control systems due to its wide operating voltage range and low power consumption.
Please note that these answers are general and may vary depending on the specific application requirements.